CSA Tuningcenter TFT 4

  • Gallery CSA Tuningcenter TFT 4 Spühl AG, Division CSA
  • Request CSA Tuningcenter TFT 4 Spühl AG, Division CSA
CSA Tuningcenter TFT 4 CSA Tuningcenter TFT 4 CSA Tuningcenter TFT 4


The equipment is run over the stone to establish a flat and even running surface from tip to tail. The resulting base structure is the foundation for the fine-tuning that follows.
A base structure, designed to suit the customer’s wishes and the snow conditions, is then worked into the base surface. Pressure regulators ensure that a consistent coating (grind) is maintained from tip to tail. When viewed in cross-section, the base profile displays a vivid structure that results in optimal gliding qualities. 
To ensure the same prerequisites for both left and right turns, the edges on both sides must be perfectly matched. For this reason, our machines allow both side-edges to be tuned simultaneously. Not only that, our high-tech procedure is designed for individuality – that’s why the side-edge level is easily adjustable.
The most critical step in the tuning process is the precision polishing of the base edges. A smooth and polished edge enables easy turning and good grip in all snow conditions.

Technical Data  
Processing width: 50 – 320 mm
Processing length: 900 – 2200 mm
Use per season: upwards of 5000 services
Electrical connection: 6 kW, Abs. 32 A
Weight: 4000 kg
Capacity per hour: up to 45 paires of skis / 20 snowboards